Description
Spare parts kit for the Rinowash upper airway treatment device.

Mode of use
Cleaning: Rinowash disassembled in its components can be washed with hot water (about 40°C) using detergent (shown according to the indications of the detergent manufacturer) and rinse under running water. When all parts have been cleaned they can be dried with a soft and restful cloth.

Disinfection: all components of the Rinowash nasal shower after being washed can be immersed in a cold disinfectant solution (such as a solution with a hypochlorite sodium concentration not exceeding 2%), following the instructions indicated by the manufacturer.
It is possible to disinfect all the components of the nasal shower by boiling them in water for a maximum time of 10 minutes: components should not be in direct contact with the bottom of the pan.
The boiling cycle may alter the color or aesthetics of the components; this does not affect the operation of the device.

Sterilization: all components of the Rinowash nasal shower are compatible with the autoclave sterilization cycle at 121°C for at least 15 minutes (maximum 30 minutes) for up to 20 cycles.

Composition
Atomizer: polycarbonate.
External platform: polycarbonate and silicone.
Sealing seal: silicone.
All materials used do not contain phthalates and the presence of natural latex is not detected.

Warnings
This spare parts kit can only be used with the Rinowash device.
Refer to the use instructions of the Rinowash device.

Conservation
Store the product at a temperature between -25°C and +50°C and humidity between 30% and 90%.

Format
The package contains:
- 1 atomizer
- 1 external bell
- 1 seal.

Cod. 471232